C BEFÜLLEN1 Drücken Sie die Öffnung

C BEFÜLLEN
1 Drücken Sie die Öffnungstaste in den Deckel, um diesen zu öffnen.
2 Mit mindestens 2 Tassen Wasser füllen, jedoch nicht höher als bis zur “max”-Markierung
füllen.
3 Deckel zum Verriegeln nach unten drücken.
C EINSCHALTEN
4 Den Sockel auf eine feste, ebene Fläche stellen.
5 Den Stecker des Sockels in die Steckdose stecken.
6 Den Wasserkocher auf den Sockel setzen.
7 Auf dem Displayfenster wird die Wassertemperatur im Wasserkocher angezeigt.
8 Die Taste < drücken und loslassen.
9 Auf dem Display wird 100 angezeigt.
10 „ drücken und loslassen.
18 „>” blinkt auf der Anzeige.
19 Stellen Sie die Temperatur mit den Tasten u und d ein.
20 Diese Funktion funktioniert nur bei den Stufen 95, 90, 85, 80, 75, 70, 65, 60, 55, 50, 45, 40, 35,
30, und 25 °C.
21 Nach 5 Sekunden leuchtet das Symbol > nicht mehr auf und die Temperatur ist erreicht.
22 Das Heizelement wird sich in Abständen anschalten, um das Wasser warm zu halten.
23 Nach 40 Minuten wird die Funktion ausgeschaltet.
24 > erscheint nicht mehr auf dem Display.
25 Auf dem Displayfenster wird die Wassertemperatur im Wasserkocher angezeigt.
C AUSSCHALTEN
26 Kocht das Wasser, wird das Element ausgeschaltet.
27 Um den Wasserkocher auszuschalten, drücken Sie kurz die Tasten < und/oder >, damit die
entsprechenden Symbole vom Display gelöscht werden.
28 Auf dem Displayfenster wird die Wassertemperatur im Wasserkocher angezeigt.
Bedienungsanleitung
Zeichnungen
1 Haken
2 Filter
3 Halterung
4 Deckel
5 Öffnungstaste
6 Griff
7 Sockel
4
29 Um Strom zu sparen, ziehen Sie den Netzstecker.
30 Ihre Einstellungen bleiben bis zu 24 Stunden lang gespeichert.

ผลลัพธ์ (อังกฤษ) 1:

C FILLING1 press the release button in the lid to this to open.2 with at least 2 cups of water but not more than up to the "max" mark fill,fill.3 lid to lock push down.C TURN4 place the base on a solid, level surface.5 the base plug into the wall socket.6 the kettle onto the base.7 the water temperature in the kettle will be shown on the display window.8 the button < press and release.9 on the display, 100 will be displayed.10 "<" blinks on the display.Cook11 If you want to boil the water, you need to do nothing.Variable temperature12 set the temperature with the buttons u and d.13 the possible temperature settings are: 100 (Cook), 95, 90, 85, 80, 75, 70, 65, 60, 55,.50, 45, 40, 35, 30, and 25 (in ° C).14 after 5 seconds lights < no longer on and the temperature has been reached.15 the water temperature has been reached, select following settings:(a) < no longer appears on the display.(b) on the display window shows the water temperature in the kettle.C HOLDING - 40 MINUTES16 have you selected a temperature below 100 ° C, and you want to keep the water warm:17 the key > press and release.18 ">" blinks on the display.19. adjust the temperature with the buttons u and d.20 this function works only when the levels of 95, 90, 85, 80, 75, 70, 65, 60, 55, 50, 45, 40, 35.30, and 25 ° C.21 after 5 seconds lights > no longer on and the temperature has been reached.22. the heating element will switch on at intervals, to keep the water warm.23 after 40 minutes, the function will be switched off.24 > no longer appears on the display.25 on the display window shows the water temperature in the kettle.C SWITCHING OFF26 boils the water, the element is turned off.27 to switch off the kettle, briefly press the buttons < or >, sobe deleted from the display corresponding icons.28 on the display window shows the water temperature in the kettle.Operating instructionsDrawings1 hook2 filter3 holder4 cover5 "open" button6 handle7 base429 to save power, unplug the appliance.30 your settings are retained for up to 24 hours.

ผลลัพธ์ (อังกฤษ) 2:

C FILLING
1 Press the Open button in the lid to open it.
With at least 2 cups of water to fill 2, but no higher than the "max" mark
fill.
3 Press the cover down to lock.
C SWITCHING
4 the pedestal on a firm, level surface.
5 Plug the socket into the socket.
6 Put the kettle on the base.
7 The display window shows the water temperature is displayed in the kettle.
8 Press the <and release.
9 The display . 100 appears
. 10 "<" flashes on the display
cooking
11 If you want to boil the water, you're done.
Variable temperature
12 Set the temperature using the u and d a.
13 The possible temperature settings: 100 ( cook), 95, 90, 85, 80, 75, 70, 65, 60, 55,
50, 45, 40, 35, 30, and 25 (in ° C).
14 After 5 seconds, the symbol <no longer lights up . and the temperature has reached
15 If the water temperature reached, select the following settings:
a) <no longer appears on the display.
b) The display window shows the water temperature is displayed in the kettle.
C. KEEP WARM - 40 MINUTES
16 If you have a temperature below selected 100 ° C, and you want the water to keep warm:
. 17 Press the> key and release
18 ">" flashes on the display.
19 Set the temperature using the u and d a.
20 This function only works for the stage 95, 90, 85, 80, 75, 70, 65, 60, 55, 50, 45, 40, 35,
30, and 25 ° C.
21 After 5 seconds the icon> does not light up and the temperature is reached.
22 The heater will turn on at intervals to keep the water warm.
23 After 40 minutes, the function is turned off.
24> no longer appears on the display.
25 on the display window, the water temperature is displayed in the kettle.
C OFF
26 Boil the water, the element is turned off.
27 To turn the kettle, press the <and / or> buttons so that the
corresponding symbols are removed from the display.
28 on the display window, the water temperature is displayed in the kettle.
User manual
drawings
1 Hook
2 filters
3 Bracket
4 cover
open button 5
6 handle
socket 7
4
29 To save power, unplug the power cord.
30 Your settings will be saved for up to 24 hours.

ผลลัพธ์ (อังกฤษ) 3:

C BEFÜLLEN
1 pressures you the opening key into the cover, around this to öffnen.
2 with at least 2 cups water do not fill, however more highly than downward up to the “max” - Markierung
füllen.
3 cover for locking drücken.
C EINSCHALTEN
4 the base on a firm, even surface stellen.
5 the plug of the base into the plug socket stecken.
6 the water digester on the base setzen.
Will the water temperature will press 7 on the display window in the water digester angezeigt.
8 the key < and flashes loslassen.
9 on the display 100 angezeigt.
10 „<” on the Anzeige.
Kochen
11 if you the water to cook to want, needs you nothing to tun.
Variable Temperatur
12 places you the temperature with the keys u and D ein.
13 possible temperature settings is: 100 (cook),95, 90, 85, 80, 75, 70, 65, 60, 55,
50, 45, 40, 35, 30, and 25 (in °C).
14 after 5 seconds the symbol does not light up < and the temperature is erreicht.
15 is reached the water temperature, selects you the following attitude:
a) < no more does not appear on that Display.
b) on the display window becomes the water temperature in the water digester angezeigt.
C KEEPING WARM – 40 MINUTEN
16 credit you a temperature under 100°C selected, and you would like to keep warm the water:
17 the key > pressure and loslassen.
18 „>” flash on the Anzeige.
19 places you the temperature with the keys u and D ein.
20 this function functioned only at the stages 95, 90, 85, 80, 75, 70, 65, 60, 55, 50, 45, 40, 35,
30, and 25 °C.
21 after 5 seconds the symbol does not light up itself > and the temperature is erreicht.
22 the heating element will in distances will turn, around the water on to halten.
23 after 40 minutes the function ausgeschaltet.
24 > warmly appears no more on the Display.
25 on the display window becomes the water temperature in the water digester angezeigt.
C AUSSCHALTEN
26 boils the water,if the element will switch ausgeschaltet.
27 off around the water digester, press the keys < and/or >, thus briefly die
entsprechenden symbols by the display deleted werden.
28 on the display window the water temperature in the water digester angezeigt.
Bedienungsanleitung
Zeichnungen
1 Haken
2 Filter
3 Halterung
4 Deckel
5 Öffnungstaste
6 Griff
7 Sockel
4
29 around river will save,pull the Netzstecker.
30 your settings remain long stored up to 24 hours.