Die gesamte Loxone-Konfigurationsda

Die gesamte Loxone-Konfigurationsdatei ist zum Download unter 1Wire-Temperatur-Luftfeuchte-Luftguetesensor.Loxone (226 Downloads) verfügbar. Dabei sind an den Ausgängen noch "Merker" und jeweils ein "Virtueller Status" mit "Statistik"-Funktion hinterlegt, damit die Werte auch in der Visualisierung sinnvoll genutzt werden können. Die Konfiguration lässt sich so relativ einfach per Copy&Paste in die eigene Konfigurationsdatei übernehmen. Ist alles korrekt verkabelt und konfiguriert, sollten die Sensorwerte korrekte Werte übermitteln, wie im Bild links zu sehen.

ผลลัพธ์ (อังกฤษ) 1:

The entire Loxone configuration file is available for download at 1Wire-Temperatur-Luftfeuchte-Luftguetesensor.Loxone (226 downloads). Yet "flags" are the outputs and each deposited a "virtual State" with "statistics" function, so that the values in the visualization can be used meaningfully. The configuration can be so relatively simple copy & paste in your own config over. Everything is correctly wired and configured, should deliver the sensor values correct values as shown in the image left to see.

ผลลัพธ์ (อังกฤษ) 2:

The entire Loxone configuration file is available for download at 1Wire temperature-humidity-Luftguetesensor.Loxone (226 downloads) available. Here, at the outputs still "flag" and each a "virtual state" with "statistics" function deposited, so that the values ​​can be put to good use in the visualization. The configuration can thus be relatively easily take over copy and paste into your own configuration file. If everything is correctly wired and configured, the sensor values ​​should not transmit correct values, as shown in the picture on the left.

ผลลัพธ์ (อังกฤษ) 3:

To download the entire Loxone-Konfigurationsdatei is under 1 Wire-Temperatur - Luftfeuchte-Luftguetesensor .Loxone (226 downloads) available. Yet there are the outputs "flag" and a "virtual Status" with "Statistics" function, so that the values can be used in the visualization.The configuration can be relatively simply by Copy&Paste in their own configuration file. Everything is properly cabled and configured, should send the sensor values correct values, such as in the picture to the left to see.